Register    Login    Forum    Search   

Home Page » Board index » Motorcycle Chassis Design » Brakes

It is currently Sat Sep 04, 2010 8:49 pm
All times are UTC - 8 hours [ DST ]
View unanswered posts | View active topics
 



Post new topic Reply to topic  Page 1 of 1
  [ 1 post ] 

Springer Brakes P-26 and P-66 Instalation

Author Message
joe
 Post subject: Springer Brakes P-26 and P-66 Instalation
 Post Posted: Tue Apr 27, 2010 10:49 am 
Offline

Joined: Tue Nov 11, 2008 2:37 pm
Posts: 17
1) Be sure Heim Joint turns freely, if it does not relace link with a heim joint that turns freeley.
2) Be sure that bearings in caliper turn freely, if not bearings will need to be replaced.
3) Caliper pivots bout axle
4) Be sure to red lock tight and correctly tourque to 29 foot pounds the DLK mounting bolts
5) Adjust wheel spacers to center caliper on the rotor
6) DLK should be approximately parallel to the rocker for correct operation.
7) Use only fresh clean brake fluid.
Top 
 Profile  
 
Display posts from previous:  Sort by  
 
Post new topic Reply to topic  Page 1 of 1
  [ 1 post ] 

Home Page » Board index » Motorcycle Chassis Design » Brakes

It is currently Sat Sep 04, 2010 8:49 pm
All times are UTC - 8 hours [ DST ]
View unanswered posts | View active topics
 

Who is online

Users browsing this forum: No registered users and 1 guest

 
 

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron