| Author |
Message |
|
Johnny
|
Post subject: American Suspension Fork tube diameters  Posted: Fri Oct 24, 2008 12:53 pm |
|
Joined: Fri Oct 24, 2008 12:50 pm
Posts: 2
|
|
I have an American Suspension Fork on my bike and I was told that its a 2-1/2 inch fork
not a 63mm. Is this right, I know the fork on my Harley is a 41mm, what gives?
|
|
  |
|
 |
|
super
|
Post subject: Re: American Suspension Fork tube diameters Posted: Fri Oct 24, 2008 2:57 pm |
|
Joined: Wed Oct 22, 2008 4:12 pm
Posts: 4
|
|
Forks made in the USA typically buy thier steel from USA steel mills so they are inch sizes like 2-1/2" or 1-7/8. If a fork advertises 63mm it probably is made overseas. Most of the harley forks 41mm are made overseas (probably as cheaply as possible) I have heard that most of the parts on a Harley are made overseas. I own a bike from Thunder Mountain, it cost moire, but its American Muscle.
|
|
| |
|
|
|
